DC5-12V bluetooth Smart APP Control Magic Color Controller for 2811 2812 LED Pixel Strip Light

Out of stock

Download APP below, to SWAP or RENT this item now.


Specification:Working voltage : DC5V~12VWorking current: 20mA~130mAWorking temperature: -20℃~60℃Remote distance :30 metersProduct size: 85mm*45mm*22mm Feature:1. Long distance APP remote control via WIFI;2. Support routing mode(AP) and LAN connection mode(STA);3. Support almost every kind of one-wire or two-wire LED driver IC ;4. Brightness adjustable, With 180 kinds of patterns and 8 kind of color adjustable patterns;5.Creatively using from-image-to-effect method for user to DIY any effect;6. Support setting pixel number and segments number, able to control up to 2048 pixels;5. DC5V~12V wide range working voltage, preventing reverse connection of power supply;6. User setting saving; App control: Both IOS version and Android OS version are available. (hardware should support WIFI)Requires IOS version 10.0 or later;Requires Android version 4.4 or later;Search”LEDHue”in App Store or Google pay or scan this QR code to download and install the App: Working mode and connecting:AP(Access Point) mode:Controller and Phone connect directly, controller works as an access point.Connect steps: 1.When the device is not connected to any WIFI network, power on the controller and wait for 20s and then controller will switch into AP mode ;2.In the WIFI setting page, find and connect the controller(named like SP108E_xxx, the default pin code is 12345678),3.Open the LED Shop App, then the controller will be showed on the device list; STA(Station) mode:Controller and phone are in one same WIFI network, in this network, users can operate the controller smoothly.Connect steps: 1. When the device is not connected to any WIFI network,power on the controller, controller will be remain in Wait-For-Connet mode for 20 seconds;2. Make sure that your phone is connected to a WIFI network, Open LED Shop APP, pressing the Add Device button,input the WIFI pin code, then press the OK to confirm and wait for the configure processing finish;3. When controller successfully enter the WIFI network, it will be showed on the device list;4. User can select the controller and remove it out of the network by pressing the Remove Device button, then the controller will switch into AP mode.Package included:1 * bluetooth led controller

Additional information

Weight 0.05 oz


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.